B2B product specification
M4 x 14mm Zinc-Plated Pan Head Self-Tapping Screw
These M4 self-tapping screws use a 14mm length, pan head and zinc-plated finish. Thread pitch, drive and packaging can be reviewed for OEM orders.
- M4 diameter and 14mm nominal length
- Pan head configuration
- Zinc-plated finish shown in this product listing
- Thread pitch, head, drive, finish and packaging can be customized
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
These M4 self-tapping screws are intended for repeatable component and hardware assembly where a 14mm length and pan head match the joint design. Material grade, drive geometry, thread pitch and finish must be confirmed for the ordered version.
For a quotation for M4 self-tapping screws, send the substrate, pilot-hole condition, required engagement, drawing or sample, quantity and pack format. Test representative samples in the actual assembly before bulk production.
Procurement note: Specify the substrate, joint thickness, pilot-hole condition, head and drive, required pitch, finish and order quantity for assembly review.
Technical Specifications
| Product Type | Self-tapping screw |
|---|---|
| Material | Confirm grade according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Zinc plated; confirm coating requirement and service environment |
| Diameter | M4 |
| Length | 14mm |
| Head Type | Pan head |
| Drive Type | Confirm according to drawing, sample or purchase specification |
| Thread Type | Self-tapping thread; pitch can be customized by requirement |
| Point Type | Confirm according to drawing, sample or purchase specification |
| Standard | Confirm the applicable standard and edition in the purchase specification |
| Application | Hardware and furniture component assembly, subject to substrate trial |
| Packaging | Bulk or custom counted packs upon request |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Available for discussion after the target specification is confirmed |
| OEM / ODM | Thread pitch, length, head, drive, finish and packaging can be customized by requirement |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Furniture hardware assembly
Confirm board or metal substrate, engagement depth and pilot-hole condition with an actual trial.
Brackets and fittings
Check head seating, drive access and thread engagement against the mating component.
OEM assembly packs
The screw can be quoted with compatible hardware after the bill of materials is confirmed.
Distributor and project packs
Count, label, barcode and carton requirements can be reviewed for the order.
Buyer Guide: How to Choose
How should the 14mm length be checked?
Compare the full joint thickness and required engagement with the actual assembly so the point does not interfere with adjacent parts.
Can the thread pitch be customized?
Yes. Provide the pitch, mating condition, drawing or approved sample for review before production.
Which drive should I specify?
Send the required drive type and tool-access condition. Drive geometry should be confirmed from the drawing or sample.
What is needed for a quote?
Provide diameter, length, material, finish, head, drive, pitch, quantity, delivery market, packaging and any inspection requirement.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
Dimensions
Check diameter, length and head dimensions against the approved drawing or sample.
Thread and point
Review thread form, pitch and point geometry according to the confirmed order specification.
Drive fit
Use the agreed driver or gauge to check engagement and assembly access.
Surface finish
Inspect visible coating condition; any corrosion test must be defined in the purchase specification.
Assembly and packaging
Verify representative assembly fit, pack count, labels and carton identification as agreed.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
What material is used for these M4 x 14mm self-tapping screws?
Material grade should be confirmed according to the drawing, sample or purchase specification. The listing shows a zinc-plated version, but no unverified grade is assumed.
Can the thread pitch, head or drive be customized?
Yes. Thread pitch, length, head, drive, finish and packaging can be reviewed from a drawing, sample or purchase specification. MOQ starts at 10,000 pcs per confirmed specification.
How do I confirm whether 14mm is the correct length?
Provide the joint thickness and required thread engagement, then test the screw in the actual assembly before bulk approval.
Is zinc plating suitable for my service environment?
State the environment and any test requirement so the coating specification can be reviewed without assuming a corrosion rating.
Can these screws be supplied in counted packs?
Yes. Confirm the quantity per pack, label, barcode, carton and any matching hardware requirements for quotation.
Can I request samples before production?
Sample arrangements can be discussed after the target specification is confirmed. Use the intended substrate and assembly method for evaluation.
Related Products
- M5 x 30mm Pan Head Self-Tapping Screw
- 410 Stainless Flat Head Self-Drilling Screws
- Round Body Threaded Insert Flange Nut
Browse the Self-Tapping Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
These M4 self-tapping screws use a 14mm length, pan head and zinc-plated finish. Thread pitch, drive and packaging can be reviewed for OEM orders.
