B2B product specification
Cross-Drive Pan Head Cabinet Self-Tapping Screws
These cabinet self-tapping screws use a cross drive, broad pan head and pointed threaded shank. Confirm size, material, finish and substrate before ordering.
- Broad pan head with cross drive
- Pointed, fully threaded shank shown in product images
- Bright silver and black finish options shown; confirm the ordered finish
- Size, thread pitch, material, finish and packaging can be customized
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
These cabinet self-tapping screws have a broad pan head, cross drive and pointed threaded shank for cabinet fittings and related hardware. The broad head can provide a larger seating area than a narrow screw head, but head clearance and seating must still be checked in the actual fitting.
For a B2B quotation for cabinet self-tapping screws, provide the cabinet or bracket material, joint thickness, pilot-hole condition, target engagement, drawing or approved sample, finish, quantity and packaging. Use a representative assembly trial before bulk approval.
Procurement note: Specify the cabinet material, bracket thickness, pilot-hole condition, required thread engagement, finish, quantity and pack format.
Technical Specifications
| Product Type | Pointed cabinet self-tapping screw |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Bright silver and black finishes are shown; confirm coating, appearance and service environment |
| Diameter | Confirm according to drawing, sample or purchase specification |
| Length | Confirm according to drawing, sample or purchase specification |
| Head Type | Broad low pan head shown in product images |
| Drive Type | Cross drive |
| Thread Type | Fully threaded coarse appearance shown; thread pitch can be customized by requirement |
| Point Type | Pointed end shown; confirm point geometry for the substrate and pilot-hole condition |
| Standard | Confirm the applicable dimensional standard and edition in the purchase specification |
| Application | Cabinet hinges, brackets and furniture hardware, subject to assembly trial |
| Packaging | Bulk cartons, counted packs or matched cabinet hardware kits by specification |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after size, substrate, finish and assembly requirements are confirmed |
| OEM / ODM | Diameter, length, thread pitch, head, drive, material, finish and packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Cabinet hinge fastening
Confirm hinge-hole diameter, board material, pilot hole, edge distance and head seating in a complete trial.
Furniture brackets and fittings
Check bracket thickness, driver access and required thread engagement in the cabinet component.
Metal-to-board hardware joints
State both materials and verify that the point and thread form suit the intended pilot-hole condition.
OEM cabinet hardware packs
Matched fittings and counted screws can be quoted after the bill of materials and pack layout are approved.
Buyer Guide: How to Choose
How should the diameter and length be selected?
Provide joint thickness, pilot-hole diameter, required engagement and clearance behind the panel; then verify a representative screw in the real assembly.
Which head and drive details matter?
Confirm the head diameter and height, seating surface, recess geometry, driver size and tool access from the fitting drawing or sample.
Can the thread pitch be customized?
Yes. Provide the required pitch, substrate, pilot-hole condition, drawing or approved sample for review before production.
How should the finish be specified?
State the required color or approved sample, service environment and any agreed coating test without assuming an unverified corrosion rating.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
Diameter, length and head
Check shank diameter, overall length, head diameter and head height against the approved drawing or sample.
Thread and point geometry
Review thread form, customized pitch, point shape and runout against the confirmed substrate requirement.
Cross-drive fit
Use the agreed driver or gauge to check recess engagement, seating and tool access.
Cabinet assembly trial
Verify pilot-hole condition, head seating and engagement in the confirmed board and fitting when included in the control plan.
Finish and packaging
Inspect visible finish, pack count, labels, matched hardware and carton identification as specified.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
What cabinet materials can these cabinet self-tapping screws be used with?
Suitability depends on the board or metal type, density or thickness, pilot hole, edge distance and required holding performance. Test the confirmed screw in the actual assembly.
Can the screw size and thread pitch be customized?
Yes. Diameter, length, pitch, head, drive, finish and packaging can be reviewed from a drawing or sample. MOQ starts at 10,000 pcs per confirmed specification.
Are both silver and black finishes available?
Both appearances are shown in the product images, but the material, coating system, color sample and service environment must be confirmed for the order.
How do I confirm the broad pan head fits my hinge?
Send the hinge or bracket sample and specify hole diameter, recess or seating area, head clearance and driver access for a representative fit check.
Can screws be packed with cabinet hinges or brackets?
Yes. Confirm each component, quantity per kit, label, barcode, inner pack and carton requirement for quotation review.
What information is needed for a quotation?
Send size, thread or sample, substrate, fitting, finish, quantity, packaging, delivery market and any agreed inspection requirement. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- M4 x 14mm Pan Head Self-Tapping Screw
- M5 x 30mm Pan Head Self-Tapping Screw
- Furniture Mounting Plates
Browse the Self-Tapping Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
These cabinet self-tapping screws use a cross drive, broad pan head and pointed threaded shank. Confirm size, material, finish and substrate before ordering.
