Colored Hex-Head Partial-Thread Timber Screw — Long pointed timber screws shown with external hex heads, unthreaded upper shanks, coarse lower threads and black, blue or white surface colors. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Long pointed timber screws shown with external hex heads, unthreaded upper shanks, coarse lower threads and black, blue or white surface colors. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Colored Hex-Head Partial-Thread Timber Screw |
|---|---|
| Current Product Configuration | Long pointed timber screws shown with external hex heads, unthreaded upper shanks, coarse lower threads and black, blue or white surface colors. |
| Primary Form | Partial-thread timber screw intended to draw confirmed timber members together while providing external-hex installation access. |
| Head / Interface | Confirm hex across-flats, head height, bearing face, under-head transition, shank diameter, washer requirement and tool clearance. |
| Thread / Mating Part | Confirm diameter, coarse thread form and pitch, threaded length, unthreaded shank, point geometry, pilot hole, timber species and engagement. |
| Current Appearance | Black, blue and white appearances are shown; confirm base material, coating system, color range, corrosion requirement and approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm timber species and condition, joint section, pilot and clearance holes, edge and end distances, driver, tightening method and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Timber frame connections | Match shank, thread, point and pilot holes to the approved joint. |
|---|---|
| Landscape timber assembly | Confirm timber condition, corrosion requirement and installation access. |
| Heavy wood furniture joints | Coordinate clamp section, bearing face and member thicknesses. |
| Color-coded fastening programs | Approve coating color, variant identity, labels and packaging. |
Buyer Guide
| Why is part of the shank unthreaded? | Confirm the joint section and required clamping behavior before specifying the threaded length. |
|---|---|
| How are pilot holes selected? | Use the actual timber, screw geometry, engagement and approved installation trial. |
| Do the pictured colors define coating performance? | No. Confirm coating process, color standard and corrosion requirement. |
| Can the photographed length define production? | No. Confirm all dimensions and tolerances by drawing, sample or purchase specification. |
Quality Control
| Hex head and shank | Inspect head geometry, bearing face, shank diameter, straightness and transitions. |
|---|---|
| Thread and point | Check form, pitch, length, point geometry and damage. |
| Timber-joint trial | Verify pilot holes, driving, clamping, seating and buyer-specified test. |
| Color and pack audit | Confirm variant color, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Why is part of the shank unthreaded? | Confirm the joint section and required clamping behavior before specifying the threaded length. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Hex head, shank, thread, point and dimensions |
| RFQ 3 | Timber species, joint section and engagement |
| RFQ 4 | Pilot holes, driver and installation method |
| RFQ 5 | Material, coating, color and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
