Hex Socket Low-Head Machine Screw — Silver-colored machine screws shown with low cylindrical heads, internal hex drives, uniform full threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored machine screws shown with low cylindrical heads, internal hex drives, uniform full threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Hex Socket Low-Head Machine Screw |
|---|---|
| Current Product Configuration | Silver-colored machine screws shown with low cylindrical heads, internal hex drives, uniform full threads and blunt ends. |
| Primary Form | Low-profile internal-hex machine screw for a confirmed nut, insert or tapped hole where head clearance is limited. |
| Head / Interface | Confirm head diameter and height, top profile, bearing face, hex-socket size and depth, under-head radius and tool clearance. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch, class, threaded length, end condition, mating thread and required engagement. |
| Current Appearance | Bright silver-colored appearance is shown; confirm base material, finish process, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating nut, insert or tapped hole, joint stack, clearance hole, hex key access, tightening method and buyer criteria. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Low-clearance machine assemblies | Coordinate head height, tool access and mating thread. |
|---|---|
| Furniture fitting attachment | Confirm insert or tapped-hole engagement and joint stack. |
| Equipment frames and brackets | Review bearing surface, clearance hole and tightening access. |
| OEM service fastener packs | Control thread, length, count, labels and protection. |
Buyer Guide
| What defines the low head? | Specify head diameter, height, bearing face and socket geometry. |
|---|---|
| Which thread data are required? | Provide diameter, pitch, class, engagement and the production mating part. |
| Can the photographed size define production? | No. Confirm length and tolerances by drawing, sample or purchase specification. |
| How should installation be approved? | State the hex tool, access, seating and buyer-specified tightening test. |
Quality Control
| Head and socket | Inspect diameter, height, bearing face, socket, edges and tool fit. |
|---|---|
| Machine thread and end | Check profile, pitch, class, length, end condition and mating fit. |
| Representative assembly trial | Verify seating, engagement, access and specified tightening test. |
| Variant and pack audit | Confirm thread and length identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| What defines the low head? | Specify head diameter, height, bearing face and socket geometry. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Low-head and hex-socket geometry |
| RFQ 3 | Thread, length and mating part |
| RFQ 4 | Joint stack, clearance and tightening method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
