B2B product specification
Black and Silver Cross-Drive Cabinet Self-Tapping Screws
These black cabinet self-tapping screws use a broad low head, cross drive and pointed coarse-thread appearance. Confirm size, material and coating by specification.
- Black and bright silver finish appearances shown
- Broad low pan / washer-style head with cross drive
- Pointed coarse-thread shank shown in product images
- Size, thread pitch, head, material, finish and packaging can be customized
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
These black cabinet self-tapping screws are shown with a broad low head, cross drive and pointed coarse-thread shank. Black and bright silver finish appearances are pictured for cabinet hinges, corner plates and related fittings, but the ordered coating and material must be confirmed rather than inferred from color.
For a B2B quotation for black cabinet self-tapping screws, send the cabinet or bracket material, joint thickness, pilot-hole condition, head clearance, drawing or approved sample, finish, quantity and pack format. Verify a representative screw in the actual cabinet assembly before bulk approval.
Procurement note: Specify cabinet material, bracket thickness, pilot-hole condition, head clearance, required engagement, finish color, quantity and packaging.
Technical Specifications
| Product Type | Pointed cabinet self-tapping screw |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Black and bright silver appearances shown; confirm coating system, color sample and service environment |
| Diameter | Confirm according to drawing, sample or purchase specification |
| Length | Confirm according to drawing, sample or purchase specification |
| Head Type | Broad low pan / washer-style head shown in product images |
| Drive Type | Cross drive |
| Thread Type | Coarse-thread appearance shown; pitch can be customized according to customer requirement |
| Point Type | Pointed end shown; confirm point geometry and pilot-hole condition |
| Standard | Confirm the applicable dimensional standard and edition in the purchase specification |
| Application | Cabinet hinges, corner plates, furniture brackets and light hardware, subject to assembly trial |
| Packaging | Bulk cartons, counted packs or matched cabinet hardware kits by specification |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after size, finish color, substrate and fitting requirements are confirmed |
| OEM / ODM | Diameter, length, thread pitch, head, drive, material, finish and packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Concealed cabinet hinges
Check hinge-hole diameter, board density, edge distance, pilot hole and head seating in the real door or panel.
Cabinet corner plates
Confirm bracket thickness, driver access, head clearance and required thread engagement.
Black furniture hardware
Match the coating color and appearance to the approved fitting sample without assuming a material grade.
OEM cabinet hardware packs
Counted screws and matching fittings can be quoted after the bill of materials and pack design are approved.
Buyer Guide: How to Choose
How should the screw size be selected?
Provide joint thickness, pilot-hole diameter, required engagement and clearance behind the panel, then complete a representative trial.
What should be specified for the broad head?
Confirm head diameter, height, bearing area, recess geometry and clearance within the hinge or bracket.
How should black finish be approved?
Provide a color or coating sample, appearance requirement, service environment and any agreed test method.
Can the thread pitch be customized?
Yes. Send the substrate, pilot-hole condition, pitch, drawing or approved sample for review before production.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
Diameter, length and head
Check shank diameter, length, head diameter, height and bearing face against the approved drawing or sample.
Thread and pointed end
Review thread form, customized pitch, point geometry and runout against the confirmed substrate.
Cross-drive engagement
Use the agreed driver or gauge to check recess fit, seating and tool access.
Black and silver finish
Inspect color, visible coverage and appearance against the approved finish sample; define any coating test in the purchase specification.
Cabinet trial and packaging
Verify representative fit, pack count, labels, matched hardware and carton identification as agreed.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
Can these black cabinet self-tapping screws be used in MDF or particle board?
Suitability depends on board density, edge distance, pilot hole, engagement and required holding performance. Test the confirmed screw in the actual board.
Can diameter, length and thread pitch be customized?
Yes. Provide the drawing, substrate and pilot-hole condition for review. MOQ starts at 10,000 pcs per confirmed specification.
Are both black and bright silver finishes available?
Both appearances are shown, but material, coating system, color sample and service environment must be confirmed for the order.
Does the broad head fit every cabinet hinge?
No universal fit is assumed. Confirm hinge-hole diameter, seating area, head clearance and driver access with the actual fitting.
Can these screws be packed with cabinet hardware?
Yes. Confirm each fitting, quantity per kit, label, barcode, inner pack and carton requirement.
What information is needed for a quotation?
Send size, thread or sample, cabinet material, fitting, finish, quantity, packaging and inspection needs. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- Cross-Drive Pan Head Cabinet Self-Tapping Screws
- M4 x 14mm Pan Head Self-Tapping Screw
- M5 x 30mm Pan Head Self-Tapping Screw
Browse the Self-Tapping Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
These black cabinet self-tapping screws use a broad low head, cross drive and pointed coarse-thread appearance. Confirm size, material and coating by specification.
