B2B product specification
M4 x 24mm Cross-Drive Pan Head Fully Threaded Screw
This M4 x 24mm pan head screw is shown with a cross drive, long fully threaded shank and blunt end for a confirmed nut, insert or threaded hole.
- M4 x 24mm size stated in product information
- Long fully threaded shank shown
- Rounded pan head with cross drive
- Blunt end shown; machine-screw-type assembly must be confirmed
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
This M4 x 24mm pan head screw is shown with a rounded cross-drive head, long fully threaded shank and blunt end. The pictured geometry resembles a screw intended for a mating nut, threaded insert, tapped hole or standoff rather than a pointed self-tapping screw, so its assembly method must be confirmed from the drawing or approved sample.
For a B2B quotation, provide the mating thread, nut or insert, joint stack, required engagement, clearance behind the assembly, head clearance, material and finish specification, quantity and packaging. Do not approve it for self-tapping use solely from the existing category name.
Procurement note: Specify the mating nut, insert or tapped hole, thread pitch, joint stack, required engagement, head clearance, finish, quantity and packaging.
Technical Specifications
| Product Type | Long fully threaded cross-drive pan head screw |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Bright silver appearance shown; confirm coating system and service environment |
| Diameter | M4 stated in product information |
| Length | 24mm stated in product information; confirm length datum and tolerance |
| Head Type | Rounded pan head |
| Drive Type | Cross drive |
| Thread Type | Fully threaded shank shown; confirm pitch and mating thread |
| End Geometry | Blunt end shown |
| Mating Component | Confirm nut, threaded insert, tapped hole or standoff according to the assembly drawing |
| Self-Tapping Suitability | Not assumed from the product images; confirm according to drawing, sample and representative assembly trial |
| Application | Control-panel covers, threaded standoffs, captive nuts, equipment frames and bracket joints |
| Packaging | Bulk cartons, counted packs or matched screw-and-nut hardware kits |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after pitch, mating thread, joint stack and finish are confirmed |
| OEM / ODM | Length, pitch, head, drive, material, finish and matched packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Threaded electronics standoffs
Confirm pitch, standoff thread depth, cover thickness, engagement and bottoming clearance.
Captive-nut bracket joints
Check nut thread, joint stack, head bearing area and access to the cross drive.
Equipment frame connections
Verify bracket slot, threaded insert or nut, vibration requirement and clearance behind the joint.
Matched screw-and-nut kits
Pack the confirmed screw, nut or insert together only after thread compatibility and count are approved.
Buyer Guide: How to Choose
Is this product a pointed self-tapping screw?
The product images show a blunt end and fully threaded machine-screw-type geometry. Do not assume pointed self-tapping performance without a drawing or assembly trial.
How should thread pitch be selected?
Match the pitch to the nut, insert, tapped hole or standoff and confirm the applicable dimensional standard and tolerance class.
How should 24mm length be checked?
Provide the joint stack, required engagement and bottoming or rear clearance, then confirm the length datum on the drawing.
What should be supplied with the RFQ?
Send the mating component, thread specification, joint drawing, material, finish, quantity, packaging and inspection requirements.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
M4 diameter and 24mm length
Check diameter, length datum and critical tolerances against the approved drawing or sample.
Pitch and mating-thread fit
Verify pitch, thread form, gauge requirement and fit with the confirmed nut, insert or tapped hole.
Pan head and cross drive
Check head diameter, height, bearing face, recess geometry and driver engagement.
Blunt end and runout
Inspect end condition, burrs, thread runout and usable engagement length.
Assembly and matched-pack check
Verify seating, engagement, bottoming clearance, pack count, mating component and labels as agreed.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
Is this M4 x 24mm pan head screw self-tapping?
The images show a blunt-ended fully threaded screw. Self-tapping suitability is not assumed; confirm the assembly drawing, mating material and representative trial.
Can thread pitch and length be customized?
Yes. Provide the mating thread, target length and joint stack. MOQ starts at 10,000 pcs per confirmed specification.
Does it require a nut or threaded insert?
The pictured geometry is compatible with machine-screw-type joints, but the exact nut, insert, tapped hole or standoff must be confirmed.
Is 304 stainless steel confirmed?
No material grade is confirmed from the product images alone. Specify and verify material according to the drawing, sample or purchase specification.
Can matching nuts or inserts be packed with the screws?
Yes. Confirm thread compatibility, component finish, quantity per kit, label, inner pack and carton requirement.
What information is needed for a quotation?
Send M4 pitch, 24mm length confirmation, mating thread, joint stack, material, finish, quantity and packaging. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- M3 Short Pan Head Thread-Forming Screw
- M4 x 12mm Black Self-Tapping Screw
- M5 x 30mm Pan Head Self-Tapping Screw
Browse the Self-Tapping Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
This M4 x 24mm pan head screw is shown with a cross drive, long fully threaded shank and blunt end for a confirmed nut, insert or threaded hole.
