B2B product specification
M3 x 14mm Cross-Drive Pan Head Screw
These M3 cross-drive screws have a 14mm length, pan head and partially threaded shank. Confirm thread form, material, finish and packaging by specification.
- M3 diameter and 14mm nominal length
- Pan head shown in product images with cross drive
- Partially threaded shank shown in product images
- Thread pitch, material, finish, drive and packaging can be customized
- MOQ starts at 10,000 pcs per confirmed specification
Quick contact: WhatsApp · sharon@hkhomeideas.com
Product Overview
These M3 cross-drive screws combine a M3 diameter, 14mm nominal length, pan head shown in product images and cross drive. The exact material grade, coating, thread pitch, point and dimensional tolerance must be confirmed for the ordered version.
For a B2B quotation for M3 cross-drive screws, send the substrate, joint thickness, pilot-hole condition, drawing or approved sample, quantity and pack format. Evaluate representative M3 cross-drive screws in the actual assembly before bulk production.
Procurement note: Specify substrate, joint thickness, pilot-hole condition, M3 diameter, 14mm length, pan head shown in product images, cross drive, thread pitch, finish and order quantity.
Technical Specifications
| Product Type | Partially threaded cross-drive screw |
|---|---|
| Material | Confirm according to drawing, sample or purchase specification |
| Finish / Surface Treatment | Zinc-plated appearance stated in product information; confirm coating requirement and service environment |
| Diameter | M3 |
| Length | 14mm |
| Head Type | Pan head shown in product images |
| Drive Type | Cross drive |
| Thread Type | Partially threaded shank shown; confirm thread form and pitch according to drawing or sample |
| Point Type | Confirm according to drawing, sample or purchase specification |
| Standard | Confirm the applicable standard and edition in the purchase specification |
| Application | Furniture hinge, bracket and component assembly, subject to trial |
| Packaging | Bulk or custom counted packs according to purchase specification |
| MOQ | 10,000 pcs per confirmed specification |
| Sample Availability | Discuss after the target specification is confirmed |
| OEM / ODM | Thread pitch, length, head, drive, material, finish and packaging can be customized |
Dimensions or performance requirements that vary by order should be confirmed according to the approved drawing, sample or purchase specification.
Applications
Furniture hardware fastening
Confirm board or metal substrate, pilot-hole condition, head seating and required engagement in an actual trial.
Brackets and fittings
Check head seating, tool access, pilot-hole condition and thread engagement in the mating part.
OEM assembly packs
Matched hardware can be quoted after compatibility, quantity per kit and labels are confirmed.
Distributor project packs
Count, barcode, inner pack and carton requirements can be reviewed for the order.
Buyer Guide: How to Choose
How should the 14mm length be checked?
Compare joint thickness, required engagement and clearance behind the assembly; then complete a representative trial.
Can the thread pitch be customized?
Yes. Provide the required pitch, mating condition, drawing or approved sample for review before production.
How should the cross drive be confirmed?
State the driver geometry and tool-access condition, and confirm engagement with the drawing or sample.
Which surface information is required?
State the coating or approved sample, appearance, service environment and any agreed test method.
Quality Control
Inspection scope should be agreed against the approved drawing, sample and purchase specification. For screws, the review focuses on dimensions, thread, drive fit, finish and assembly performance.
Dimensions
Check diameter, length and head dimensions against the approved drawing or sample.
Thread and point
Review thread form, customized pitch and point geometry against the confirmed specification.
Drive fit
Use the agreed cross drive driver or gauge to check engagement and assembly access.
Surface finish
Inspect visible coating condition; define any corrosion test and acceptance criteria in the purchase specification.
Assembly and packaging
Verify representative assembly fit, pack count, labels and carton identification as agreed.
If salt-spray, torque, pull-out or another performance test is required, include the test method and acceptance criteria in the RFQ for feasibility review.
Packaging & Customization
JH Fix can review this screws product as an individual component or as part of a matched OEM hardware kit. MOQ starts at 10,000 pcs per confirmed specification; final feasibility and lead time depend on the approved product and pack design.
Bulk cartons
For production lines, distributors and scheduled replenishment.
Small poly bags
Counted packs for furniture assembly or project delivery.
Blister or box packs
Retail-ready formats subject to confirmed pack design.
Private labels
Barcode, label and instruction-sheet requirements can be reviewed.
Mixed hardware kits
The selected part and compatible fasteners can be quoted as an assembly kit.
Frequently Asked Questions
What material is used for these M3 cross-drive screws?
Confirm the material grade according to the drawing, sample or purchase specification; no unverified grade is assumed.
Can thread pitch, head, drive or finish be customized?
Yes. These items and packaging can be reviewed from the drawing or sample. MOQ starts at 10,000 pcs per confirmed specification.
How do I confirm whether 14mm is the correct length?
Provide joint thickness and required engagement, then test the screw in the actual assembly before approval.
Is the zinc-plated appearance stated in product information suitable for my service environment?
State the environment and any test requirement so the coating specification can be reviewed without assuming a corrosion rating.
Can counted or private-label packs be supplied?
Yes. Confirm quantity per pack, label, barcode, carton and any matched hardware requirements.
What information is needed to quote M3 cross-drive screws?
Send the target dimensions, material, finish, mating parts, drawing or sample, quantity, delivery market, packaging and any agreed inspection requirement. MOQ starts at 10,000 pcs per confirmed specification.
Related Products
- M4 x 14mm Pan Head Self-Tapping Screw
- M5 x 30mm Pan Head Self-Tapping Screw
- Furniture Mounting Plates
Browse the Screws category, learn about JH Fix, or contact the team with a drawing or sample.
Need This Product Customized for Your Project?
Send the confirmed product specification so JH Fix can prepare a focused B2B quotation. For this category, include diameter, length, head, drive, thread, point and substrate.
- Product name and required size
- Material and finish
- Application and mating components
- Quantity and delivery market
- Packaging and private-label requirements
- Drawing or sample availability
- Company and contact details
- Inspection or testing requirements
Please do not send confidential drawings until the appropriate handling terms are agreed.
These M3 cross-drive screws have a 14mm length, pan head and partially threaded shank. Confirm thread form, material, finish and packaging by specification.
